Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Weight ratio | Environmental standard |
GU805 | A two-component polyurethane electronic pouring adhesive. It has good adhesion strength to various substrates such as PVC and inorganic substrates. | Biege | 1.2 ± 4,000 | ≥99% | A:B=4:1 | RoHS\ REACH |
EP199 | A room temperature cured epoxy pouring adhesive. Due to its characteristics of simple preparation, high bonding strength, good heat resistance, good electrical insulation, good air tightness, good resistance to cold and heat shock, it is widely used for pouring electronic components with high air tightness and high temperature resistance. | Black | 2,000~8,000 after A and B mixing | 100% | A:B=4:1 | RoHS\ REACH |
EP198 | A two-component normal temperature or heat cured epoxy pouring adhesive. Due to its characteristics of simple preparation, high bonding strength, excellent heat resistance, good electrical insulation, good air tightness, good resistance to cold and heat shock, it is widely used for pouring electronic components with high air tightness and high temperature resistance (above 250℃). | Black | 3,000~9,000 after A and B mixing | 100% | A:B=6:1 | RoHS\ REACH |
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Weight ratio | Environmental standard |
EP118 | A two-component thermal conductive epoxy electronic pouring sealant which cures at room temperature. It has long pot life, mild temperature impact, small shrinkage, good operability, permeability and wettability. After cured, it has good surface gloss, few bubbles, high adhesion and mechanical strength. It can bond PBT, PVC, etc. It has good resistance to cold and heat shock, and good electrical performance. It is suitable for sealing of electronic components with the above requirements. | Black | A:20,000~40,000 B:5-100 | 100% | A:B=10:1 | RoHS\ REACH |
EP146 | A two-component epoxy electronicpouring sealant which cures at room temperature or at medium temperature. It has long pot life, mild temperature impact, small shrinkage, good operability, permeability, and wettability. After cured, it has good surface gloss, few bubbles, high bonding strength and mechanical strength. It can bond PVC. It has good resistance to cold and heat shock, good electrical performance, and good resistance to boiling.It is suitable for sealing of electronic components with the above requirements. | Black | A:9,000~13,000 B:5-100 | 100% | A:B=4:1 | RoHS\ REACH |
Product Name | Characteristics and Application | Separation Condition | Viscosity, cps | Solid content | Applicability to | Product Features |
BA516 | A single-component low-temperaturedebondtype handling adhesive. It is suitable for bonding and separation between thin glass and thick glass substrates. Always applied by slot die coater. It has high transparency,goodheatresistance, and enough strength to fix the plastics substrate in general manufacturing processes. It is easily peeled off at lowtemperatures, without residual adhesive. It has high UV penetration rate, and neveraffects the subsequent curing of the frame adhesive. | Low temperature | 150~600 | 25-35% | Temporary bonding between plastics and glass | Good heat resistance, strong adhesion, ease to peel off at low temperatures, and no residual adhesive after peeling |
BA513 | A single-component low-temperaturedebondtype handling adhesive. It is suitable for bonding and separation between substrates with significant CTE differences.Always applied by slot die coater. It has high transparency,goodheatresistance, and enough strength to fix the plastics substrate in general manufacturing processes. It is easily peeled off at lowtemperatures, without residual adhesive. It has high UV penetration rate, and neveraffects the subsequent curing of the frame adhesive. | Low temperature | 150~600 | 25-35% | Temporary connection between thin glass and thick glass substrate | Good heat resistance, strong adhesion, ease to peel off at low temperatures, and no residual adhesive after peeling |
BU220 | A single-component UVbondedhandling adhesive. It is suitable fortemporary bonding betweentransparent plastics substratesand vehicle substrates.Always applied by slot die coater. It has high transparency, good heat resistance, and enough strength to fix the plastics substrate in general manufacturing processes. After UV cured, it is easily peeled off, without residual adhesive. | UV | 200~1800 | 25-35% | Temporary connection betweentransparent plastics substrateand vehicle substrate | Good heat resistance, strong adhesion, ease to peel after UV curing, and no residual adhesive after peeling |
Product Name | Characteristics and Application | Color | Viscosity, cps | Curing condition | Applicability to | |
UV710S | A single-component UV + heat curedLCD frame adhesive forscreenprinting process. It has good defoaming and leveling properties.Afterscreen printing and bonding, it always generates nobubbles,hasstrong adhesion toplastics substrates,goodelectrical properties, flexibility, and low ion content, and never affects the characteristics of liquid crystals. | Slightly yellow translucent paste | 30,000~80,000 | UV+ heat | Dual-curable frame adhesive for plastics substrate in screen printing process | |
UV710F | A one-component UV+ heat cured LCD frame adhesiveused in the ODFprocess. It hasstrong adhesionto the substrate,good flexibility, low ion content, and never contaminates liquid crystalbefore and aftercured. | Slightly yellow translucent paste | 120,000~200,000 | UV + heat | Dual-curable frame adhesive forplasticssubstrate in ODFprocess | |
UV770F | It is one-component UV cured EWD frame adhesiveused in the ODFprocess. It has simple curing method, fast curing rate,good sag resistance, strong adhesion toplastics substrates,goodelectrical properties,good flexibility, low ion content, and incompatibility with waterbefore and aftercured. | Slightly yellow translucent paste | 100,000~200,000 | UV | Water-cured frame adhesive |
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Softening point | ||||
GA368 | Automotive decoration (bonding of roofs) | Light yellow | 250~350 | ≥20% | ≥130℃ | ||||
GA633 | Automotive interiors (bonding of side door panels). | Light yellow | 250~350 | ≥20% | ≥110℃ | ||||
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Peeling strength | ||||
GA623 | It is mainly used to bond porous interfaces such as sponges or bond porous interfaces with other materials. It has high solid content, good spraying performance, low permeability to the substrate, good adhesion to the substrate, and low consumption. | Light yellow viscous fluid | 100~250 | ≥30% | ≥50℃ | ||||
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Weight ratio | Initial curing time | Curing conditions | ||
EP912 | A two-component solvent-free environmentally acceptable floor adhesive. Ithas such advantages as handling convenience, long application time, curing at room temperature,nofoaming, no sagging, and storage stability.After cured, it has goodresistance to impact and water, and high adhesion to various substrates. It can be widely used to bond wood, metal, concrete, rubber, PVC, ceramics, etc. | A: Yellow viscous fluid B: Yellow semi transparent viscous fluid | A:5,000~15,000 B:200~1,000 | 100% | A:B=3:1 | 8 hr (10 g) | Room temperature | ||
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | weight mixture ratio | Initial Curing time | Curing condition | Shear strengthMPa | Hardness Shore D |
GU302 | An adhesive used for civil construction. It can bond rubber floor, wood, gypsum board, steel plate, PU foam material, rock wool board, and PVC board very well. | Light yellow viscous fluid | 10,000 | ≥99% | A:B=4:1 | 120 min (10 g) | Room temperature | 8 | 45 |
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Weight ratio | Initial curing time | Curing condition |
EP100 | Two-component room temperaturecured high-temperaturerepair adhesive. Due to its characteristics of simple preparation, high temperature resistance, good impact resistance, good wettability, and high bonding strength. It has good bonding effect on materials such as wood, carbon fiber cloth, and metal. It can achieve room temperature curing and heat resistanceabove100℃. | A: Milky white viscous fluid B: Yellow semi transparent viscous fluid | A:8,000~20,000 B:100~500 | 100% | A:B= 3:1 | 8hours(10 g) | Atmospheric temperature |
EP918 | Room temperature or medium temperature cured epoxy adhesive. Due to its characteristics of simple preparation, high bonding strength, and good impact resistance.Especially, it can match the color of wood according to customer needs, overcoming the common blackening phenomenonaftersolid wood lamination and painting. It is specifically used for laminating and bondingvarious solidwood on yachts, and can also be used for strong bonding of materials such as metal, glass, ceramics, stone, hard plastic, FRP, wood, etc. | A:Viscous fluid, color determined by customers B:Yellowish brown transparent viscous fluid | A:10,000~40,000 B:20,000~65,000 | 100% | A:B= 1:1 | 50minutes(10 g) | Room temperature or medium temperature |
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | softening point | ||
GA108 | It can bond rubber, plastics, wood, leather, paper cloth, glass, board, fireproof board, cement, metal, aluminum plastic composite panel, etc. very well, but soft PVC, PE, and PP silicone rubber very poorly. | Light yellow brown transparent viscous fluid | 5,400~7,000 | ≥24% | >66℃ | ||
LT128 | It can bond metal, rubber, plastics, wood, leather, paper cloth, plywood, fireproof board, aluminium plastics composite panel, cement, etc. very well, but soft PVC, PE, and PP silicone rubber very poorly. | Light yellow brown transparent viscous fluid | 2,000~4500 | ≥20.5% | >70℃ | ||
GA118 | It can bond metal, rubber, plastics, wood, leather, paper cloth, plywood, fireproof board, aluminium plastics composite panel, cement, etc. | Light yellow brown transparent viscous fluid | 2400~3,000 | ≥22% | ≥70℃ | ||
Product Name | Characteristics and Application | Color | Viscosity, cps | Curing conditions | |||
MS405 | A one-component neutral modified silicone. It can be cured by its reactionwithwater in air.It has excellent performance and can bond most materials without any primer. It has excellent resistance to weather, UV,heatand cold, and excellent adhesiontovarious building materials. Anenvironmentally acceptable adhesivewith very low VOC. | White | Pasty | Water | |||
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | |||
GA550 | A solvent cement mainly containing synthetic rubber which can bond metals, wood, leather, MDR board, paper, cloth, rubber, plastics, cement, etc. | Light yellow viscous fluid | 200~400 | ≥19% | |||
GA620 | It is suitable for bonding porous surfaces such as cloth, sponge, etc. It has low viscosity, high solid content, good spray resistance, low permeability to substrates, and good adhesion to various substrates. | Light yellow viscous fluid | 80±20 | ≥30% | |||
CE125 | A polyvinyl acetate polymer. It can bonf wood, veneer, paper, cloth, bamboo, etc. | White thick latex | 18,000~23,000 | ≥18% | |||
CE135 | A polyvinyl acetate polymer. It can bond wood, veneer, paper, cloth, bamboo, etc. | White thick latex | 120,000~180,000 | ≥35% | |||
CE105 | A polyvinyl acetate polymer. It can bond wood, plywood, paper, cloth, leather, bamboo, etc. | White thick latex | 15,000~40,000 | ≥36% | |||
CE145 | A polyvinyl acetate polymer. It is used as one-component high-strength adhesive for civil construction. | White thick latex | 8,000~15,000 | ≥40% | |||
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | |||
CA381 | A one-component tile adhesive prepared by special modified polymer emulsion. It is easily used. It can effectively improve the bonding strength between polished tiles and bonding mortar, and solve the common problems of hollowing and peeling in polished tiles. It has excellent water resistance, and is extremely suitable for dense stone and ceramic tiles with low water absorption. | Milky white | 2,000±500 | 50%±1 | |||
CA388 | A transparent waterproof adhesive for exterior walls. It is made by a special polymerization process. Its coating has excellent waterwhite resistance, wet adhesion, transparency, inability to affect the original effect of the building, non-stickiness, and flexibility. Due to high-quality raw materials, the coating has excellent aging resistance and weather resistance, and good workability. It has good coverage on tile surfaces and joints and never shrinks. After cured, the coating forms a transparent elastic waterproof protective film, which is an ideal protective waterproof material for various types of building surfaces. | White transparent | 3,000±1,000 | 40%±1 | |||
CA375 | It has strong permeability, good sealing effect, high bonding strength, non-toxicity, no odor, safety and environmentally acceptability. It is suitable for application ofputty to concrete, brick walls, and cement mortar or interface treatment beforeplastering and roughening ofsmooth walls. It can effectively prevent hollowing, cracking, and powdering of the wall leveling layer, and improve the bonding strength between putty or mortar and the wall. | Milky white | 1500±500 | 12-15% | |||
CA512 | A polyacrylate emulsion used for prevention of water and leak. | Light blue lotion | 50~250 | ≥48% | |||
CA560 | An elastic emulsion suitable for caulking of indoor or outdoor building materials that do not directly contact with water. It has paint resistance, safety and Environmental standard, beautifies edges and seams and prevents cracks. | White, light gray | Paste, >500,000 | >70% |
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Weight ratio | Initial Curing time | Curing condition | Shear strength, MPa | Hardness Shore D |
GU302 | An adhesive used for civil construction. It can bond rubber floor, wood, gypsum board, steel plate, PU foam material, rock wool board, and PVC board very well. | Light yellow viscous fluid | 10,000 | ≥99% | A:B= 4:1 | 120 min (10 g) | Two components mixed and cured at room temperature | 8 | 45 |
GU803 | Adhesive used for civil construction. It is suitable for flooring in gymnasium, schools, homes, etc. It can bond various substrates such as PVC and rubber flooring very well. | Light yellow viscous fluid | 600,000 | ≥99% | A:B= 5:1 | 90 min (10 g) | Two components mixed and cured at room temperature | ≥ 1 (cement) | 70 |
GU802 | An adhesive used in civil construction. It bonds various substrates such as PVC, rubber, wood, epoxy flooring, metal, and cement very well. | Light yellow viscous fluid | 500,000 | ≥99% | A:B= 5:1 | 90 min (10 g) | Two components mixed and cured at room temperature | ≥10 | 70 |
GU515(H) | An adhesive used in buildings. It has high strength and good elasticity. It can be used to bond metal, plastics, rubber, fiber, wood, glass, sponge foam, ceramics, etc. | Light yellow viscous fluid | 50,000 | ≥99% | Single-component | 150 min (10 g) | 25℃ RH=50% | ≥8 | 65 |
Product Name | Characteristics and Application | Color | Viscosity, cps | Surface skinning time | Curing condition | Shear strengthMPa | Hardness, Shore D | ||
MS450 | An elastic adhesive for flooring. It is specially designed for bonding of various flooring surfaces such as cement, tile, marble, quartz tiles, and wooden floor to provide excellent adhesion, elasticity, noise resistance, moisture resistance, and ability to match with indoor colors. It contains no formaldehyde or VOC. An environmentally acceptable elastic adhesive for indoor decoration and flooring. | brown | 800,000 | 30 min | Water | ≥1.5 | 65 | ||
Product Name | Characteristics and Application | Color | viscosity cps | Solid content | |||||
CA688 | It isdevelopedfor bonding of PVCflooring. It is suitable for PVC rolls and PVC blocks, including homogeneous and permeablePVCflooring, anti-slip flooring and sound insulation flooring with foam lining, especially for thick flooring. | Light yellow | 15,000~ 25,000 | >70% | |||||
CA588 | It isdevelopedfor bonding of PVC flooring materials. It is suitable for bonding of PVC rolls for flooring, especially for thick flooring. | Light yellow viscous fluid | 15,000~ 38,000 | ≥71% | |||||
CA888 | A one-component adhesive for rubber floor, PVC rolls, walls, stairs, and other plastics floors. | Light yellow viscous fluid | >50,000 | >70% | |||||
CA810 | A polymer emulsion designed for PVC flooring. It has good construction operability and bonding performance, strong initial adhesion, long application time. It can be applied on various absorbent or non absorbent substrates, with stable performance. | Milky white | 5,000~ 10,000 | ≥52% | |||||
CA510E | A polymer emulsion specially designed for PVC flooring. It has good bonding strength and pressure sensitivity, especially outstanding initial adhesion. It has good resistance to water, solvent and low temperature, ease to use, and stable performance. | Milky white with blue light | 25,000~ 35,000 | ≥53% |
Product Name | Characteristics and Application | Color | Viscositys | Solid content | Gloss | Wear-resistance |
CA310 | CA310 is a water-based spraying varnish. It is mainly used for surface varnish finish and protection of paper, wood, etc. It has fast curing rate, good transparency, high gloss, good waterproofing property, low odor, no irritability, and Environmental standard. It can effectively replace solvent-based varnish products and never cause environmental pollution and harm to human health. | Milky white liquid | 15-30 | 40~45% | >75 | >100cycles |
CA311 | It is water-based brushing varnish. It is mainly used for surface gloss and protection of paper, wood, etc. It has fast curing rate, good transparency, high gloss, good waterproofing property, low odor, no irritability, and green and Environmental standard. It can effectively replace solvent-based varnish products and never cause environmental pollution and harm to human health. | Milky white liquid | 20~50 | 35-40% | >60 | >100cycles |
CA302 | CA302 is an infrared radiation cured water-based varnish with high gloss and wear-resistance. It is mainly used for varnish finish of paper and printed products to increase the surface gloss of printed products, wear resistance and surface smoothness and protect ink. It has fast curing rate, high production efficiency, low odor, no irritability, and never causes environmental pollution. Its coating is very glossy, resistant to wear, flat, smooth, resistant to yellowing, fast finished,firm, uniform, foldable, etc. | Milky white liquid | 35-45 | 41-45% | 60~70 | >100cycles |
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Weight ratio | Preliminary curing | |
EP980 | A two component epoxy adhesive which can quickly cure in five minute quick dryings. Due to its characteristics, such as simple preparation, high bonding strength, good impact resistance, and good low-temperature curing properties, it is widely used for strong bonding of metals, glass, ceramics, stone, hard plastics, FRP, wood, etc., especially DIY products. | Milky white | A:20,000~50,000 B:10,000~40,000 | 100% | A:B=1:1 | 5 minutes | |
EP460 | It is suitable for low stress and general industrial applications at high impact strength and high peel strength. It can be widely used for aluminum, steel, and other metals, as well as various plastics and ceramics. | Light amber | 20,000~30,000 after mixing | 100% | A:B=2:1 | 60 minutes | |
EP120 | A two-component transparentpouring sealant which cures at room temperature. Due to its high transparency,resistance to yellowing, and good defoaming performance, it is suitable for transparent pouring andhandicraft production. | Colorless transparent | A:1,000~3,000 B:5-100 | 100% | A:B=3:1 | / | |
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Peeling strength | ||
GA150 | It can bond metal, rubber, wood, leather, etc. It has high solid content, strong adhesion to the substrate in the early and late stages. It has excellent heat resistance and thus is suitable use at high temperature. It is easily coated by brush androller. | Light yellow viscous fluid | 3,000~7,000 | ≥28% | Temperature resistance ≥ 120 ℃ | ||
Product Name | Characteristics and Application | Color | Viscosity, cps | Surface junction Skin time | Curing condition | Hardness, Shore D | |
MS405 | A one-component neutral modified silicone. It can be cured by its reactionwithwater in air.It has excellent performance and can bond most materials without any primer. It has excellent resistance to weather, UV,heatand cold, and excellent adhesiontovarious building materials. Anenvironmentally acceptable adhesivewith very low VOC. | White | Pasty | 30 min | Water | 40 |
Product Name | Characteristics and Application | Color | Viscosity, cps | Solid content | Weight ratio |
EP195 | A two-component epoxy adhesive which cures at room temperature or high temperature. Due to its characteristics, such as simple preparation, high bonding strength, good heat resistance, corrosion resistance, and impact resistance, it is widely used for metals, glass, ceramics, stone, hard plastics, FRP, wood, and other materials with high temperature resistance. | A: Black viscous fluid B: Yellow viscous fluid | A:1,000,000~2,000,000 B:500,000~1500,000 | 100% | A:B=2:1 |
EP918-2 | Two-component carbon fiber repair adhesive, curing atroom temperature, simple ratio. Excellent strength and toughness, bondingstrength ≥100MPa, high temperature resistance up to 100℃. It has good bondingeffect on wood, carbon fiber cloth, metal and other materials. Especiallysuitable for carbon fiber cloth Winding process. | A: Light yellow viscous liquidB: Brown liquid | A:500000-800000CPB:100000-250000 | 100% | A:B=1:1 |
EP934 | Two-component carbon fiber repair adhesive, curing at roomtemperature, simple ratio, has the characters of strong adhesion, goodtoughness, curing fast, high thixotropy, water resistance and high temperatureresistance up to 100℃. Easy to thick adhesive coating atroom temperature, widely used in metal, glass, carbon fiber glass and othermaterials. | A:White viscous liquidB:Light yellow to amber liquid | A:500000-800000CPB:100000-250000 | 100% | A:B=3:1 |
EP913 | Two-component carbon fiber repair adhesive, curing atroom temperature, Curing at room temperature, has the characters of strong adhesion, good toughness,great corrosionresistance and good impact resistance. Widely used in metal, glass, ceramics,stone, hard plastics, FRP, wood and other materials. It has good strength oflong-term resistance to 200℃ high temperature requirements. | A: White or Black viscous liquidB:Light yellow to amber liquid | A:30000-80000CPB:3000-8000CP | 100% | A:B=3:1 |
ZhejiangKuo Sen Fine Chemical Technology Co., Ltd.
Address:No. 23 Wufu Road,TianzihuIndustrialPark, Anji County, Zhejiang Province
Tel:0572-5666688
Fax:0572-5662158
E-mail:sales@ksbond.com